Commercial Deep Fryers for Restaurants and Catering Kitchens
Deep fryers are among the most heavily used appliances in snack bars, restaurants, staff canteens and catering operations. Whether it's french fries, fish fillets in batter or vegetables in tempura-style coating: a commercial deep fryer must hold its temperature reliably, handle large quantities of frying oil and be quick to clean during busy service. At iGastroNomic you will find a wide selection of commercial deep fryers as single or twin-pan models, as floor-standing or countertop units, for electric or gas operation.
Electric or Gas Fryers: Choosing the Right Energy Source
Electric fryers connect to your existing power supply, are simple to install and are well suited to businesses without a gas connection or with limited space. Gas fryers are used in kitchens with high frying volumes, where fast heat-up and high output are the priorities. Your connection situation, ventilation requirements and daily demand are the decisive factors.
Configuration and Number of Pans to Suit Your Operation
Floor-standing units are the classic solution for kitchens with a fixed workstation, while countertop models save floor space and suit counters or small serving areas. Single fryers with one pan are sufficient for moderate volumes. Twin fryers with two separate pans allow you to fry two products at the same time, such as fries and breaded items, without flavours mixing. Plan your capacity around your peak load, not the daily average.
What Professionals Look for When Buying
Capacity: aligned with peak times, weekends and events
Drain valve: makes filtering and oil changes considerably easier
Baskets: single or multi-basket systems, depending on whether products are cooked in parallel or one after another
Connection and installation: clarify power or gas supply, ventilation and space requirements in advance
Build quality: stainless steel simplifies cleaning and withstands commercial use
Cleaning, Oil Care and Safe Operation
Frying oil loses quality through heat and food residue. Filtering regularly after every shift, removing crumbs from the pan and changing the oil in good time extend its service life and ensure consistent taste. Food should be lowered into the oil as dry as possible to avoid splashing. Allow the oil to cool before draining. The quantity and change interval depend on the food being fried and the level of use.
Why Buy from iGastroNomic
iGastroNomic is both manufacturer and wholesaler under one roof. Trade customers benefit from B2B net pricing, a broad range and personal advice by phone and WhatsApp, for example when you are weighing up electric versus gas models or pan configurations. We deliver throughout Europe from our headquarters in Nackenheim.
Frequently asked questions
What is the difference between electric and gas deep fryers?
Electric deep fryers require a power connection and are usually simpler to install. Gas deep fryers are suited to businesses with high frying volumes, but they require a gas connection and suitable ventilation.
Which deep fryer is suitable for a snack bar with high french fry sales?
For high volumes, a fryer with sufficient capacity designed for your peak times is recommended. A twin fryer allows you to cook fries and other products in parallel. The choice between electric and gas depends on the connection you have available.
What is the drain valve on a commercial deep fryer used for?
The drain valve allows hot frying oil to be drained, filtered and changed in a controlled way, without having to scoop it out. This saves time and reduces the risk of burns or spills. Oil changes and cleaning become considerably easier during daily service.
How often should frying oil be changed in commercial deep fryers?
A fixed change schedule depends on the food being fried, the level of use and how well the oil is filtered. Filtered oil generally lasts considerably longer, while heavily soiled or darkened oil should be replaced promptly. Check smell, colour and foam formation as simple indicators.
Is a twin fryer worthwhile compared with two single units?
A twin fryer saves floor space and allows two different products to be fried at the same time. Separate pans prevent flavours from mixing. For businesses with changing products it is a flexible solution, while single units can offer advantages where operating requirements vary widely.
Deep Fryers for Commercial Kitchens and Snack Bars
Deep fryers for commercial use are a core part of every catering supply range: they fry chips, poultry, fish and snacks in large quantities at a constant oil temperature. They are designed for restaurants, snack bars, hotels, canteens and central kitchens. When buying, the key factors are mainly the energy type (electric or gas), pan size, number of pans and design as a countertop or floor-standing unit.
Applications: Commercial Fryers for Restaurants, Snack Bars and Hotels
A commercial fryer is needed wherever fried food must reach the plate quickly, evenly and with consistent quality. In the snack bar and quick-service restaurant it often runs all day; in the hotel and canteen it serves as a side-dish station or handles peak times at lunch. Butcher shops with a lunch menu and bakeries with a snack range also rely on compact units. Small models with 4 litres and one basket suit cafés, bars and food trucks with a manageable frying volume. Large pans with 20 or 30 litres are intended for businesses that deliver high portion numbers on a continuous basis.
Electric Fryers or Gas Fryers?
Electric fryers are the most common choice because they need no gas installation and are easy to set up. They are available as a countertop unit or as a floor-standing unit with open base, so they fit small kitchens as well as fully equipped cooking lines. It is important to check the existing power connection and the required connected load in advance. Gas fryers heat the oil via burners and are an alternative if a gas connection is available or the power supply is limited. They are mainly used in central kitchens and businesses with continuously high utilisation. The choice therefore depends less on frying results and more on infrastructure, operating costs and installation location.
Double Fryer or Single Pan: Which Variant Suits?
A double fryer has two separate pans, each with its own basket. You can fry two products in parallel, for example chips and breaded goods, without flavour or allergens being transferred. This is particularly advantageous during peak periods. The electric double fryer and the gas double fryer differ mainly in their heating system, while the two-zone operating logic remains the same. A single fryer is the space-saving solution for smaller volumes and uniform frying products. If you operate only one fryer, bear in mind that changing the food being fried loads the oil; a second pan increases flexibility here.
Variant
Capacity / Design
Typical Use
Countertop fryer, single pan
compact, width 400 mm
Café, bar, snack bar with small menu
Countertop double fryer
two pans, width 800 mm
Snack bar, restaurant, catering
Floor-standing unit with open base
electric, single pan 15 litres
Restaurant, hotel kitchen, cooking line
Fryer 4 l or 2 x 4 l
one or two baskets
small portions, snack range
Fryer 8 l to 16 l, also double
with drain tap
Catering with medium throughput
Fryer 20 l and 30 l
single pan with drain tap
Central kitchen, canteen, quick-service restaurant
Buying Guide: Capacity, Output and Features
The right capacity depends on the quantity you fry per hour during peak times. As a rough guide, the manufacturer states for small models the amount of chips per basket, for example up to 1 kg at 4 litres and up to 2 kg at 2 x 4 litres. The larger the pan, the more stable the oil temperature remains when food is lowered in. Look for a drain tap, which makes oil changes safer and cleaner, as well as an adjustable thermostat and overheating protection. Also check the installation dimensions (width, depth, height), the required connected load and the space available at your kitchen counter before ordering.
High-Pressure Fryer: When Is Special Equipment Worthwhile?
The pressure fryer (also known as a high-pressure fryer) cooks food in a closed vessel under pressure. It is mainly used for chicken pieces in the fast-food sector, as cooking time and oil absorption are reduced. For operation, training and safety regulations are essential. A high-pressure fryer for home use is neither common nor sensible in a private household; a small open unit is sufficient there. The fryers offered in this category are open commercial fryers for chips, schnitzel, fish and snacks. For most businesses they are the more economical and lower-maintenance solution.
Material, Hygiene and Care
Commercial fryers are made of stainless steel. The material is robust, heat-resistant and can be cleaned thoroughly in line with HACCP requirements. Smooth pan surfaces, removable heating elements and a drain tap make cleaning considerably easier. For a long service life and consistent food quality, filter or change the oil regularly, boil out the pan after each oil change or clean it with a suitable detergent, and rinse thoroughly. The heating elements should remain free of deposits so that heating-up time and energy consumption stay stable. Cold zones beneath the heating elements prevent frying residues from burning.
Delivery Throughout Germany, Austria, Switzerland and Europe
At iGastroNomic you order professional deep fryers with fast, reliable delivery throughout Germany, to Austria, to Switzerland and to further countries in Europe. Restaurateurs, hoteliers, butchers, bakers, canteens and commercial customers find the right model for their business here: from a small countertop unit to a large 30-litre fryer. As a specialist supplier of catering supplies, we advise you on choosing the right size, energy type and features.