SKU: THATS107
Stainless Steel Work Table, 100 x 70
- Item no.
- THATS107
- W×D×H
- 1.000 × 700 × 850 mm
There are 235 products.
Work tables with a 700 mm depth are the standard in restaurants and commercial kitchens. The depth accommodates GN containers and kitchen equipment and allows comfortable operation while working. At iGastroNomic you will find stainless steel work tables in many versions for restaurants, snack bars, hotels, canteens, bakeries and catering businesses. The following sections explain what matters when making your selection.
A work table for restaurants serves as a preparation, cutting and storage surface. Typical locations include serving counters, cold kitchens, dishwashing areas, bakeries and caterers. For coffee machines or small appliances, a work table with upstand is particularly practical, as liquids do not drip off the sides.
The version determines how the table is used:
The key factors are the overall length, the table height in relation to staff, the load capacity of the top and the connection to existing equipment. Look for a closed, smooth stainless steel surface without crevices and edges where dirt can collect. For tables with upstand, also check the wall situation, as wall clearance and connection to sinks or counters determine the fit.
Stainless steel is hygienic and easy to clean, provided the surface remains intact. Use commercially available cleaning agents without chloride content and follow up with a stainless steel care product. Steel wool and abrasive cleaners leave scratches in which bacteria and dirt can accumulate. For sliding doors and open bases, guides, edges and joints should be checked regularly.
iGastroNomic is both manufacturer and wholesaler. You benefit from a wide selection of 700 mm deep work tables, B2B net prices for trade customers and personal advice by phone and WhatsApp. We deliver across Europe from our company headquarters in Nackenheim. This allows trade customers to quickly find the right commercial stainless steel work table, which they can purchase directly online.
A depth of 700 mm is the common standard because it accommodates GN containers and most kitchen equipment. At the same time, there is enough room in the working aisle for comfortable handling. This dimension combination is particularly widespread in practice for wall placement and workflows.
For coffee machines, a work table with an upstand is recommended, as water and coffee residue are retained on the surface. Make sure it has sufficient load capacity and a location with access to water and drainage. A smooth stainless steel surface makes daily cleaning easier.
A base shelf provides an open storage area that is well suited for equipment or crates. Sliding doors protect goods and containers from dust and contamination and are therefore particularly suitable for food areas with high storage requirements. The choice depends on your storage concept and workflow.
Yes, our range includes self-assembly versions that are suitable for installation in tight spaces or during refurbishments. Check the floor levelness, the weight of the individual parts and the tools required in advance. If you have questions about the right version, the iGastroNomic team will advise you by phone or WhatsApp.
Clean the surface after each use with warm water and a commercially available cleaning agent without chloride content. Wipe in the direction of the grain and dry the surface afterwards. Avoid steel wool, as scratches make the surface more vulnerable.
Work tables 700 mm deep are professional stainless steel work surfaces with a 70 cm depth for kitchens, butcher shops, bakeries and canteens. They suit anyone who needs a hygienic, robust and space-saving work surface. When buying, the key factors are mainly the length (100 to 200 cm), the choice between a model with or without upstand, and the available floor space.
A stainless steel work table with 70 cm depth is one of the most versatile pieces of furniture in a professional kitchen. It serves as a preparation surface for vegetables, meat and fish, as a serving counter at the pass, or as a side surface next to the range, fryer and dishwashing area. Typical locations include restaurants, hotel kitchens, snack bars, catering, commercial kitchens and canteens. Butcher shops and bakeries also use them as robust work surfaces.
The 70 cm depth is a proven compromise: it offers enough room for chopping boards, GN containers and utensils, without the reach to the back of the surface becoming too long. In narrow kitchens and passageways, there is still sufficient room to move freely.
Our range of work tables 700 mm deep includes lengths of 100, 120, 140, 150, 160, 180 and 200 cm. Short tables are suitable for niches, food trucks or as additional space next to a piece of equipment. Medium lengths between 140 and 160 cm provide enough room for a full workstation in most restaurant kitchens. The long versions with 180 and 200 cm are ideal for preparation stations where several people work at the same time or large quantities need to be prepared.
Before buying, measure the floor space including working aisles. Also consider whether the table will stand freely in the room or against a wall, as this affects the decision for or against an upstand.
| Variant | Typical Use | Feature |
|---|---|---|
| Without upstand | Freestanding workstations, central islands, serving counters | Flat surface, accessible from all sides |
| With upstand | Wall installation in kitchens, dishwashing area, bakeries | Protects the wall from splashes and dirt |
| 100 and 120 cm long | Small kitchens, snack bars, niches | Space-saving, suitable as additional surface |
| 140 to 160 cm long | Restaurant, café, canteen | Versatile standard for one workstation |
| 180 and 200 cm long | Commercial kitchen, butcher shop, catering | Large surface for several people |
A work table with upstand has a raised edge along its rear side. It holds back splashing water, liquids and small items and prevents dirt from collecting between the table and the wall. This is particularly important near sinks, when preparing meat and fish, or when working with dough. If you place the table directly against the wall, this version is the better choice.
The version without upstand is suitable when the table stands freely in the room or when you want to move equipment, containers and goods freely to the sides or the back. It can also be aligned flush with other furniture or appliances.
All models are made of stainless steel. The material is food-safe, rust-resistant and resistant to heat, moisture and common cleaning agents. The smooth, non-porous surface absorbs no odours or liquids and thus meets the hygiene requirements of a commercial kitchen. At the same time, the surface remains dimensionally stable and long-lasting even with intensive daily use.
For designing a complete kitchen, solid catering supplies made of stainless steel are the best foundation: the tables combine harmoniously with sinks, shelving and equipment and create a uniform, clean appearance.
For daily cleaning, warm water, a mild detergent and a soft cloth are sufficient. Wipe in the direction of the grain so the surface stays even. Avoid steel wool, abrasive sponges and chlorine-based cleaners, as they can damage the surface. On models with upstand, clean the transition between surface and edge particularly carefully, as dirt can collect there.
When doing heavy cutting work, always use a chopping board to avoid scratches. Check the stability of the feet regularly and place the table on level flooring.
iGastroNomic delivers stainless steel work tables quickly and reliably to commercial customers across Germany, Austria, Switzerland and Europe. Whether it is a restaurant in Hamburg, a hotel in Munich, a butcher shop in Vienna or a canteen in Zurich: you order online and receive your equipment directly at your business. This way you find suitable catering equipment for a new opening, a refit or a replacement purchase all in one place.
↻