SKU: 09345013
MCG (All Models) - Foot
- Item no.
- 09345013
- W×D×H
- 30 × 23 × 20 mm
12 categories · 8,275 models – for restaurants & commercial kitchens
There are 8275 products.
A single failed component can bring an entire operation to a standstill. Whether it's a dishwasher, cold room or combi steamer: if you can source spare parts for commercial equipment quickly and precisely, downtime stays short. On this page, trade customers from restaurants, snack bars, hotels, canteens, bakeries and caterers will find a wide range of catering spare parts for the common equipment groups in professional kitchens.
The range is organised by equipment type so you can find the right part faster:
In addition, other spare parts & accessories are available for fastening, sealing and connecting elements used across many equipment groups.
A precise order saves time and avoids wrong purchases. Please have the following details ready in advance:
If you are unsure, a photo of the component or the type label helps. Personal advice clarifies whether a single part is sufficient or an assembly is the more sensible choice.
Regular cleaning and maintenance significantly extend the service life of commercial equipment. Wear parts such as gaskets, brushes and filters should be checked according to usage intensity and replaced in good time. Keeping frequently used parts in stock reduces downtime during operating hours. Electrical components should always be replaced only after disconnecting the unit from the power supply and by a qualified electrician.
iGastroNomic is a manufacturer and wholesaler of commercial kitchen and catering equipment, headquartered in Nackenheim. As a B2B supplier, we offer trade customers B2B net prices, a broad range and personal advice by phone and WhatsApp. We deliver throughout Europe. By combining in-house manufacturing with wholesale, you benefit from expert support from a single source when you need to buy spare parts.
The model number and often the serial number are on the rating plate of the unit, usually on the side panel, rear or inside the appliance. Note these details before ordering. This makes it considerably easier to match the correct spare part.
Gaskets, filters, heating elements, brushes and dosing components are particularly affected, as they are subjected to mechanical and thermal stress in continuous operation. Bearings, fans and door hinges also show wear over time. Regular visual checks help identify failures early.
Simple mechanical parts such as gaskets or handles can often be replaced yourself, provided the unit is disconnected from the power supply. Electrical components such as heating rods, control boards or thermostats should only be installed by a qualified electrician or a specialist service company. If in doubt, we will advise you by phone or WhatsApp on the appropriate next step.
Our range is aimed at trade customers such as restaurants, snack bars, hotels, canteens, bakeries and caterers. Trade customers receive B2B net prices. For your order, we need your business details so that we can process the purchase correctly.
Compare the faulty part with the illustration or article description and check it against the equipment type and serial number. If there are variations or product series changes, the part may look different or be installed differently. Our personal advice by phone or WhatsApp will help you identify the right part clearly.
Spare parts for catering equipment are wear and replacement parts such as rubber gaskets for refrigerated counters, doors and drawers or castors with and without brake, which help you get equipment in a restaurant, hotel, butcher's shop or staff canteen back into operation quickly. When buying, the right design, exact dimensions and correct installation position matter, not a new appliance.
If a unit fails in the kitchen, every breakdown costs time and revenue. If you keep the right spare part for catering equipment in stock or can order it quickly, you avoid buying a new unit and keep operations running smoothly. Typical areas of use are foodservice, hospitality, snack bars, bakeries, butcher's shops, commercial kitchens and staff canteens, wherever equipment runs in daily heavy use.
Our range is organised by equipment type. You will find spare parts for dishwashers, snack equipment, bain-maries and hot holding units, beverage and coffee machines, vacuum packers and sealers, meat and food processing equipment, grills, ovens and combi steamers, cooking equipment, refrigeration units, and dough and mixing machines. Other spare parts and accessories are also available. As a reliable source for catering supplies, we bring wear parts together in one place.
The door gasket is one of the most heavily stressed parts of every refrigeration unit. It is opened and closed many dozens of times a day, comes into contact with cleaning agents, and hardens or tears over time. A faulty rubber gasket lets warm air in, the unit runs longer, power consumption rises and the cold chain is at risk.
We supply gaskets for refrigerated counters in many variants: as a drawer gasket for 2 and 3 drawer blocks in GN 1/1 and 2/3, as a full door gasket, as a gasket for glass doors (black), for pizza prep counters and for refrigerated counters with underbar refrigeration. Drawer gaskets are available individually or in sets of 2 or 3 gaskets, depending on the number of drawers.
| Spare part | Typical use | Special feature |
|---|---|---|
| Drawer gasket GN 1/1 | Refrigerated counter with 2-drawer block | Individually or as a set of 2 gaskets |
| Drawer gasket 2/3 | Refrigerated counter with 2/3 drawer block | Set of 2 gaskets |
| Drawer gasket 3-drawer block | Refrigerated counter with three drawers | Set of 3 gaskets |
| Full door gasket | Fridge and refrigerated counter with full door | Matched to the respective unit size |
| Glass door gasket | Refrigeration unit with glass door | Black version |
| Castor with or without brake | Mobile equipment and base frames | Height 150 mm, available individually |
For spare parts for refrigeration units, fit is everything. The decisive factors are the design (door, drawer, glass door), the size of the gasket and the series of the unit. Measure the old gasket, check length and width, and pay attention to the number of parts per pack. For drawer blocks, you need to know how many drawers the unit has and whether it is GN 1/1 or 2/3.
If you are looking for a spare part for a refrigerated counter, the rating plate is a good place to start. It shows the model designation, which allows the correct gasket to be identified clearly. If you are unsure whether a part fits your unit, we are happy to advise you before you order.
Mobile equipment, base frames and trolleys depend on working castors and wheels. We offer castors with a height of 150 mm, with brake and without brake, both available individually. Castors with a locking brake keep the unit secure at the workstation, for example with refrigerated cabinets or prep tables. Castors without brake are suitable as the counterpart on the axle or for trolleys that should roll freely.
When replacing parts, always check the overall height, the fitting on the unit and the number of castors. If one castor is defective, it is best to replace its counterpart on the same side as well, so the unit moves evenly and does not wobble.
Gaskets made of flexible rubber are designed for cold rooms and refrigerated counters. They seal the door tightly, are easy to wipe clean and prevent moisture and germs from getting into joints and corners. An intact gasket therefore supports hygiene in line with HACCP and reduces the energy consumption of the refrigeration unit, because the compressor has to run less often.
For castors, load capacity, running surface and a reliable brake are what count. In kitchens with wet floors and frequent cleaning, choose parts that tolerate water and cleaning agents well.
Many door gaskets can be replaced without special tools. Pull the old gasket out of the groove, clean the seat thoroughly and fit the new gasket evenly. If necessary, warm it slightly so it sits neatly at the corners. Then check with a sheet of paper whether the door closes tightly all the way round.
Clean gaskets regularly with a mild detergent and warm water, and dry them. This keeps them supple for longer. As part of your routine, check for cracks, deformation or mould in the frame, because every leak makes refrigeration more expensive. For castors, it is worth regularly checking the brake, bearings and dirt build-up.
We deliver spare parts quickly and reliably throughout Germany, to Austria, to Switzerland and to further countries in Europe. With spare parts, every day counts. With the right catering supplies from a single source, you ensure that refrigerated counters, fridges and mobile equipment in your business are quickly back in service.
↻