Sink Units & Sinks by category

3 categories · 157 model – for restaurants & commercial kitchens

Active filters

Sink Units & Sinks for Commercial Catering

A sink unit is the centrepiece of any washing area in a restaurant, snack bar, hotel kitchen, staff canteen or bakery. The right design saves steps, supports hygiene and makes daily workflows easier. At iGastroNomic you will find commercial sinks and sink units in a range of designs built for professional, everyday use.

Applications in Professional Kitchens

Sink units are used for pre-rinsing, stacking dirty crockery and cleaning pots, GN containers and kitchen utensils. Depending on the operation, a stainless steel sink unit with a basin, work surface and base cabinet may be the best choice. Typical applications include:

  • Dishwashing area with a connection to a dishwasher
  • Pre-rinsing and preparation with high volumes of crockery
  • Cleaning of cookware and kitchen utensils
  • Ice station or bar with compact specialist sinks

Types and Variants at a Glance

The range differs mainly in construction and function. The most important groups are:

  • Sink units with closed base: enclosed base unit with storage for cleaning agents or crockery
  • Sink units with sliding doors: quick access to the base cabinet, practical for frequent use
  • Sink worktops: work surface with an integrated basin for fitting out or extending existing installations
  • Sinks for special applications: compact basins for ice scoops, bars or small items

What Professionals Look for When Buying

Basin position, space requirements and working direction are key. Decide whether the basin should sit on the left, in the centre or on the right, so that crockery flows in a logical sequence, and whether a dishwasher will be connected. Also pay attention to:

  • Number and depth of basins matched to your washing volume
  • Clean, low-joint construction for hygiene
  • Drain arrangement, overflow pipe and water connections
  • Available floor space, so that aisles and work routes remain clear

Cleaning, Care and Operation

Stainless steel is robust but should be cleaned regularly to prevent limescale and water marks. Do not use abrasive agents such as steel wool, and avoid chloride-based cleaners. Also observe the manufacturer's care instructions. Check drains and joints regularly so that damage is spotted early.

Why Buy from iGastroNomic?

iGastroNomic is both manufacturer and wholesaler. Trade customers benefit from B2B net prices, a wide selection and personal advice by phone and WhatsApp. We deliver throughout Europe from our company headquarters in Nackenheim. If you have questions about dimensions, connections or combinations, we will support you directly so you can find the right sink unit to buy.

Frequently asked questions

What is the difference between a sink unit and a sink?

A sink is the basin itself used for washing up. A sink unit is a complete piece of furniture with a basin, work surface and often a base cabinet or closed base. Sink worktops offer only the work surface with an integrated basin.

What should I consider when choosing the basin position of a commercial sink unit?

The basin position determines the workflow: dirty crockery should flow in a logical direction towards the dishwasher or washing area. Check whether the basin should sit on the left, in the centre or on the right, and whether a dishwasher connection is required.

How do I clean a stainless steel sink unit properly in a commercial kitchen?

Clean the surface daily with warm water and a suitable cleaning agent, then wipe it dry. Do not use steel wool or chloride-based cleaners, as these can promote corrosion. Also observe the manufacturer's care instructions.

Is a sink unit with sliding doors suitable for catering businesses?

Yes, sink units with sliding doors are particularly suitable if the base cabinet is used frequently, for example for cleaning agents, crockery baskets or consumables. The sliding doors allow quick access without large swinging movements.

Can trade customers from abroad order sink units from iGastroNomic?

iGastroNomic delivers throughout Europe. B2B net prices apply to trade customers. For personal advice on selection, dimensions and connections, you can reach the team by phone or via WhatsApp.

Stainless Steel Sinks & Sink Units | Buy Online

Sinks & sink units made of stainless steel are robust work units with an integrated bowl for washing dishes, vegetables, pots and kitchen utensils. They are designed for restaurants, hotels, snack bars, canteens, butcher's shops and bakeries. When buying, the key factors are the number and position of bowls, the table dimensions and hygienic construction.

Stainless steel sink: applications in professional kitchens

A stainless steel sink belongs in every professional kitchen, as large quantities of dishes, chopping boards, pots and baking trays accumulate daily. In catering and hospitality it serves as the central washing station; in a butcher's or bakery it is used for cleaning tools, containers and equipment. In canteens, catering kitchens and snack bars it is also a fixed part of the workflow.

For catering supplies for the washing area, iGastroNomic offers sinks designed for continuous commercial use. The models differ in number of bowls, bowl position and size, so a suitable solution can be found for almost every layout.

One bowl or two bowls: which option fits?

The most important decision concerns the number of bowls. A single-bowl sink suits businesses with modest washing volumes, back rooms, bars or snack bars. The single bowl can be arranged on the left, on the right or in the centre. This leaves a work surface on one or both sides for dirty and clean dishes.

A double-bowl sink allows a clear workflow: pre-rinse or soak in the first bowl, rinse in the second. This is particularly practical if you clean vegetables and dishes separately or need to meet the hygiene requirements of a large kitchen. The “two bowls centre” variant is available, for example, in sizes 100 x 60, 100 x 70 and 120 x 60 cm.

Overview: comparing sink configurations

ConfigurationTypical useFeature
Sink unit, one bowl leftKitchens where the work surface on the right is used for dirty dishesBowl at left edge, work surface right
Sink unit, one bowl rightKitchens with supply from the left or placement at the end of a wallBowl at right edge, work surface left
Sink unit, one bowl centreWashing stations with work surfaces on both sidesWork surfaces left and right of the bowl
Sink unit, two bowls centrePre-rinsing and final rinsing, separate cleaningTwo bowls usable alternately
Compact sink station, one bowl left or rightCompact washing stations in professional kitchensAvailable in 120 x 60 cm

The right size: 100 x 60 to 120 x 70

The dimensions of the sink unit determine how much work surface and bowl capacity you have. Our range includes lengths of 100 and 120 cm and depths of 60 and 70 cm. A 100 x 60 cm unit fits into narrow kitchens, snack bars and back rooms. With 120 x 70 cm you gain significantly more space for GN containers, dish racks and pots.

Measure the installation space, door widths and walkways in advance. Also allow clearance to walls, dishwashers and refrigeration units. In large kitchens with several stations, sinks in different sizes can be combined to optimise the workflow from dish return to service.

Material and hygiene: why stainless steel?

Stainless steel is the preferred material in commercial kitchens because it is rust-resistant, acid-resistant and easy to clean. The smooth, non-porous surface offers bacteria little hold and withstands cleaning agents, heat and mechanical stress. This makes a stainless steel sink the hygienic choice for businesses that must meet food inspection requirements.

When buying, look for clean welded seams, rounded bowl edges and a sturdy understructure with height-adjustable feet. An upstand at the back protects the wall from splashing water. This keeps the workplace dry and tidy, even under heavy use.

Connection, installation and care

Operation requires a water connection with a suitable tap and a drain with trap. Before buying, check whether the tap and waste fitting are included or must be ordered separately. The bowl position should match the existing connections so that you do not have to plan long pipe runs.

Daily care requires only warm water and a mild cleaning agent. It is best to wipe stainless steel in the direction of the grain and to avoid steel wool and chlorine-based cleaners, as they can attack the surface. If you do this, you will keep a clean, shiny sink for years. As catering equipment with a long service life, this investment pays off quickly.

Delivery across Germany, Austria, Switzerland and Europe

iGastroNomic delivers sinks and sink units reliably across Germany, Austria, Switzerland and Europe. Whether it is a restaurant in Hamburg, a hotel in Munich, a canteen in Vienna or a butcher's shop in Zurich: your stainless steel unit arrives safely packed and in commercial quality. As a specialist catering supplies dealer, we are happy to advise you on choosing the right size and bowl arrangement.

↻