Crêpe refrigerated counter

Active filters

Crêpe Refrigerated Counters for the Crêpe Station

A crêpe refrigerated counter is a refrigerated counter with a reinforced stainless steel worktop on which one or two crêpe makers stand. Below, batter, butter, chocolate spread, fruit, cheese and ham are stored at +2 to +8 °C – within reach, hygienic and without extra walking. For crêperies, cafés, ice cream parlours, market stalls and food trucks it is the most space-saving solution for a complete crêpe station.

Design

  • Worktop without upstand, strong enough for two crêpe makers, with space for filling and folding.
  • Refrigerated base with doors or drawers, often with a compartment for batter containers and GN inserts for fillings.
  • Fan-assisted cooling with automatic defrost and digital temperature display.
  • Optional refrigerated topping unit for GN containers.

What matters

Because crêpe makers give off a lot of heat, good insulation of the top and a high climate class are important. Check the depth of the work surface in front of the appliances, stainless steel inside and out and free air supply at the refrigeration unit. The counter runs on 230 V; the crêpe makers need their own connections.

Hygiene

Always store batter and dairy chilled and covered, change containers daily, clean the top after service and record temperatures according to HACCP.

Checklist

  • Width for one or two crêpe makers
  • Doors or drawers, space for batter containers
  • Refrigerated topping unit
  • Climate class and air supply

Also useful: crêpe makers, waffle makers, refrigerated topping displays and refrigerated counters. iGastroNomic delivers at trade prices throughout Europe and advises you personally by phone and WhatsApp.

Frequently asked questions

How does a crêpe refrigerated counter differ from a standard one?

The top is designed as a stand surface for crêpe makers without upstand, and the base is suited to batter containers and fillings. A standard refrigerated counter is intended for GN containers and general preparation.

How many crêpe makers fit on the counter?

Depending on width, one or two units with Ø 35 or 40 cm, with space beside them for filling and folding.

Can I display toppings chilled?

Yes, with a refrigerated topping display for GN containers on the top or a model with an integrated chilled topping unit.

What connection does the crêpe counter need?

The counter runs on 230 V. The crêpe makers need their own sockets or a gas connection.

Crêpe Refrigerated Prep Table for Catering & Snack Bars

A crêpe prep table is a refrigerated stainless steel worktable that combines a crêpe maker, batter cooling and ingredient wells in one place. It is designed for creperies, snack bars, cafés, food trucks and hotel buffets that need to work quickly and hygienically. When buying, the number of GN pans, the arrangement of doors or drawers, the depth and the power of the crêpe maker are the deciding factors.

Crêpe Prep Table: Applications in Foodservice

If you make crêpes commercially, you need short distances: batter, fillings and toppings must be chilled but within immediate reach. A crêpe prep table for foodservice does exactly that. Typical locations are snack bar, restaurant, café, hotel breakfast, event catering, staff canteen and mobile sales at markets and festivals.

A complete crêpe station fits into a small space. This saves walking distances, reduces waiting times at the counter and keeps fresh goods such as cream, fruit, spreads or cheese reliably in the cold storage. This makes food safety noticeably easier in daily operation.

Layout: GN 1/6 Rail, Doors and Crêpe Maker

Our Crêpe Prep Table Premium Plus offers space for 11 GN 1/6 containers in the rail. Store toppings, fruit, sauces, ham or vegetables sorted and in sight. The refrigerated base with 2 doors holds batter containers, dairy products and supplies. The crêpe maker is already included in delivery, so the station is ready for immediate use.

A fixed arrangement pays off especially for sweet and savoury crêpes and galettes. Staff always reach for the same well, portions stay consistent and service becomes predictable. The prep table also serves as a sturdy work surface for preparation.

Comparison: Prep Table Variants at a Glance

VariantTypical useFeature
Crêpe prep table with 2 doors and GN 1/6 railCreperie, snack bar, café, event standCrêpe maker included, ingredients within reach
Prep table with drawers (e.g. 6 drawers)Mise en place, line kitchenAccess to ingredients without bending, sorted by type
Prep table with doorsKitchen, bar, bakeryMore storage for large containers
Narrow prep table (e.g. 60 cm deep)Compact kitchens, small standsSpace-saving, smaller footprint
Freezer prep tableStorage of frozen goodsFor sub-zero temperatures, not intended for fresh produce

Buying Advice: Size, Depth and Drawers or Doors

Measure the available space first. If you have plenty of room, choose a longer prep table with more GN containers. For small kitchens or mobile food vans, narrow prep tables with 60 cm depth are in demand because they fit into any nook. Note that depth and rail size affect the working surface.

The question of doors or drawers depends on your workflow. A prep table with 6 drawers is ideal for mise en place, because each drawer holds one product group. Doors, on the other hand, offer more room for large batter containers and bulk packs. For the crêpe prep table with 2 doors this is practical, as batter containers and supplies stand conveniently underneath. Also check the power connection, ambient temperature at the installation site and space for ventilation.

Freezer Table or Refrigerated Table: What Suits Crêpes?

The term freezer table is often used for any refrigerated worktable. In fact, freezer tables operate below freezing and are suitable for ice cream, frozen vegetables or prepared convenience products. A crêpe prep table, on the other hand, keeps batter, fruit, cream and toppings in the fresh-chill range. This preserves texture and flavour.

If you also need frozen goods, combine the crêpe prep table with a separate freezer table or freezer. This separates the temperature zones cleanly and prevents fresh produce from losing quality.

Material, Hygiene and Maintenance

A professional stainless steel prep table is robust, heat-resistant and easy to clean. This matters, because batter residue, sugar and sauces quickly stick. Smooth surfaces and rounded edges make hygiene easier according to HACCP standards. The GN pans are dishwasher-safe and can be swapped quickly.

Wipe down the work surface with a mild cleaner after every shift and clean door seals regularly. Keep the condenser free of dust and grease so the prep table works efficiently and uses less power. A glance at the temperature display belongs in every daily check.

Delivery to Germany, Austria, Switzerland and Europe

We deliver your crêpe prep table quickly and reliably across Germany, Austria, Switzerland and Europe. For snack bars, restaurants, hotels, bakeries and canteens, you will find the right foodservice equipment at iGastroNomic from a single source. If you are equipping your entire kitchen, complement the table with further catering supplies such as crêpe makers, GN containers and refrigeration units. For questions about size, connection and installation site, we are happy to advise you.

↻